Installation guide

We cover a wide area in and around, Bolton, Wigan, Chorley, Salford Please contact us to check if your area is covered within our standard supply and installation charges.

We will carry out a site survey before the installation is carried out. Once you have chosen the right system for you we will contact you to book a convenient appointment date and time to install the new system.

For combi swaps - installation normally takes approximately 1 day to complete.

We will remove and dispose of your existing boiler and connect up your new boiler to existing supplies already in place. Our price includes making good required when removing your old boiler. The price is for a standard combi boiler exchange and does not include any additional pipework required nor does it include a power flush. This is deemed as extra work and will be chargeable. No additional works will be carried out without the prior consent of the customer should the existing pipework not meet British Standard requirements. As an example, the existing gas pipe being may be 15mm copper as opposed to the correct requirements for a 22mm copper pipe direct from the gas supply (gas meter) or even an upgraded supply of 28mm for higher output boilers.

For system upgrades (conventional to combi) - installation normally takes 2 days to complete.

The boiler will be installed in the old boiler position. The price includes removal of your hot water cylinder and all making good necessary pipework to run the hot water supply direct from your boiler to your taps. It also includes a chemical system flush (not a powerflush) and a run of gas pipework upto 10M in 22mm additional gas pipework is usually charged at £10 per metre. We will also disconnect your cold water supply from the water tank in your loft and remove them, your hotwater will now be under mains pressure and your heating system will also be now pressurised so we will check the system's integrity under the new working pressures. Should you require the boiler to be moved to a new position, please contact our engineer for a free quote or inspection. No additional works will be carried out without the prior consent of the client.

On completion you will be issued with a Gas Safety installation certificate. The installation will be registered with Gas Safe and they will notify your Local Authority Building Control. This certificate is essential if you intend to sell your property in the near future as it will be revealed on a Land Charge Search. All our engineers are Gas Safe registered. It is against the law to install a boiler unless you are a registered competent person with Gas Safe.

Important information:

If you have any queries regarding this issue please contact our lead engineer Mr Kris Hitchen - 07521 472 147. If purchasing your own boiler please check with Kris before ordering one to find out if the boiler size is correct for your property, we have been doing this a long time and the most common mistake is that customers and some other engineers believe that bigger is better and it isn't because bigger = more cost. A larger boiler might be necessary depending on the size of the property or your hot water needs, we will give you all the information you need to make this decision.please contact us to see if the installation is possible. We are only too happy to give you any advice you may require.